Revit Structure Tutorial – Attaching Structural Objects Together

When modelling Structural objects such as walls, columns and trusses it is sometimes very useful to attach the top or bottom of these elements to other structural objects such as roofs, floor slabs and foundations etc. This technique will maintain a parametric relationship between the elements and accommodate edits such as slope and elevation.

Attach Top Base Columns and Walls

You can attach the following families to the references in the table below:

Revit Attach Top Base table

We will start by looking at attaching structural columns to Floors.

In-Situ Concrete Column to Floor

Select a column and then click Attach Top/Base from the Context panel as shown below.

Attach Top Base on Contect panel

On the Options Bar below the Ribbon you will see the followingOptions Bar - Columns

You can of course attach either the Top or the Bottom of the column to a floor slab, the attachment Justification allows for the following processing of the In Situ Concrete columns:

Revit In Situ Column Join options

As you can see the in Situ Concrete members will join as expected but the Steel, Timber and Precast columns will prove more problematic. These columns will not cut and a Reference plane will need to be utilised to create the required detail.

Revit Steel Column Join options

If a Structural Column is attached to a non-structural target such as a roof or ceiling then you will see the following warning, the column is still attached but the analytical model will have no connectivity and behave like a mast!

Error - Non-Structural Target

Walls have a similar workflow where you can attach either the top or base of a wall to a roof, floor, ceiling or another vertical wall. The below image shows a simple example of attaching a block work wall to two structural slabs.

Attach Wall to Floor

Things can get a little more challenging where you have a situation as shown below where your wall needs to attach to the underside of a beam. In this situation you will need to select the wall and then edit the profile and then use the pick lines tool to create the required geometry.

Revit Pick lines to edit wall profile

Also note that if you edit the profile of a wall then this will disassociate the constraints that the Attach Top/Base command adds.

Trusses can be attached to roofs and floors and enables the user to attach the top or bottom boom to various floor shapes. The below example shows a steel truss with the top chord attached to a sloping floor.

Revit - Steel Truss

Here are some more examples with a timber truss attached to a roof and a steel truss attached to a roof that was created as an extrusion.

Revit Roof with Trusses Attached

If the Top and Bottom chord are drastically different then you may have to make use of the Edit Profile tool on the contextual ribbon. This allows the user to create a sketch for both the top and the bottom chords. Also notice that once the truss has been created you can effectively ‘explode’ the truss to structural framing with the Remove Truss Family command.

Revit - modify Truss Ribbon

Enjoy,

 

lawrenceH

 

 

About lawrenceh

I am currently employed by Excitech, one of the largest Autodesk resellers in the UK, to provide training and other services such as implementation and project support to our clients. The main products I get involved with are Autodesk Revit Structure & Autodesk Inventor. My personal interests include aviation, engineering and walking.
This entry was posted in Tutorials and tagged , , , , , , , . Bookmark the permalink.

7 Responses to Revit Structure Tutorial – Attaching Structural Objects Together

  1. Pingback: Weekly Roundup | The BIMsider

  2. lawrenceh says:

    Thanks Paul, glad you enjoyed it.

  3. virajvoditel says:

    I’m modelling a multistorey RCC structure. I have to model the walls such that their top reaches the beams of the top floor. To avoid intersection and calculation of wrong quantities I am manually giving negative top offsets after checking the depth of the beam. Is there any faster way of doing this? I have 113 types of beams in my project and this is proving to be a pain.

    • lawrenceh says:

      This will be a manual task unless you can automate the task in something like Dynamo or using the API. Technically this should be possible as the next vertical object above the base of the wall should be the beam.

  4. Cody Fox says:

    Another great tutorial that our students use in training. While we use Revit curriculum, these tutorials provide extra resources to practice with. Thanks

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s