Tips and Tricks – A Complex model in Autodesk Building Design Suite Ultimate

I thought I would share an interesting challenge I recently had for creating some complex geometry and being able to transfer this geometry both to Revit Structure and Autodesk Robot Structural Analysis Professional. I have used my own data just to verify and test the procedures required.

The software used within the Building Design Suite Ultimate package is:

  • Autodesk Inventor 2015
  • AutoCAD 2015
  • Autodesk Robot Structural Analysis Professional 2015
  • Autodesk Revit 2015

I modelled a Stadium within Autodesk Inventor and used the split command to create the various positions for the truss sections that I wanted to produce. The Inventor model is fully parametric and capable of change relatively quickly.

Autodesk Inventor - Stadium Concept

I then used the XEDGES command in AutoCAD to extract all the wireframe edges. The other option is to output the model to ACIS and then explode the geometry.

Stadium with Rational Geometry

This model was then taken into Autodesk Robot Structural Analysis by opening the dwg file. The lines are automatically converted to bars. I then assigned the relevant members and the model was ready to design.

Robot Model

Finally you can then create the Revit model from the Robot model! A lot of Autodesk software used here but if you have the Building Design Suite Ultimate then this could be a viable workflow.

Stadium in Revit

Have Fun,

Lawrenceh

6 thoughts on “Tips and Tricks – A Complex model in Autodesk Building Design Suite Ultimate

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s